Home » Camera Systems » Master Tailgaters Emblem Backup Camera Replacement for Ford F150, F250, F350, F450, F550 (2004-2016), Flex (2009-2012) | IP68 Waterproof | HD Camera | Genuine Ford Emblem
Price: $52.99 - $64.10 (as of Dec 03, 2024 00:45:18 UTC – Details)
Product Description
Master Tailgaters Replacement Emblem with Backup Camera
Emblem WITH Backup Reverse Camera ( Full Color Camera)
COLOR: Chrome
For use with( Years):
Ford Flex (2009-2012)*
Ford F150, F250, F350, F450, F550 (2004-2016)*
*Note- Prior to ordering, measure your current emblem. This replaces all large oval emblems located at the center of the tailgate.
Installation:
This backup camera can be connected to any aftermarket monitor with a Yellow RCA input. Typically the factory emblem is attached to your truck with double sided tape. Use a heat gun, at a low heat setting, and use a piece of floss between the emblem and tailgate to remove the old emblem. On some older models, you may need to drill a small hole in your tailgate to run the wiring through. Most 2006+ models come with the holes already drilled.
Description:
This is a Genuine Emblem (part # CL3Z-9942528-B), aftermarket Chrome base, and backup camera. For the power supply, you can connect it to any 12V power source. Includes video and power extension cable, 8 Meters (26 feet).
The Camera:
The most important feature of this Emblem is the camera.
Master Tailgaters is dedicated to providing the best camera: clarity, dependability and longevity.
Each Camera is manufactured to provide a clear image. Not all cameras are made the same and we know that which is why Master Tailgaters never cuts any corners. In order to ensure a quality product, our cameras are double checked prior to shipping.
Our cameras are designed to work in low light settings. We know that backing up at night deserves a clear and safe picture of your surroundings.
Sensor: ¼” On-Semi (USA) CMOS Active Pixel Array, Lens: Nidec (Japan) (Glass + Plastic)
Minimum Illumination : .1 Lux light sensitivity
Signal System : NTSC/PAL, Pixels 728 x 582
Electronic Shutter : 1/50 to 1/100,000 seconds
Resolution: 600 TV lines
Angle: 170 Degree
Waterproof Rate: IP68
Current Consumption: 120mA Max
Power: DC 12V
Operating Temperature: -4 to 167 F
Installation of this Emblem is a breeze.
Each of our Cameras include proper wiring. The video cable is 8M in length.
Prior to installing and running all wiring, double check to make sure everything is in proper working order.
If you have any questions, just ask!
This backup camera can be connected to any aftermarket monitor with a Yellow RCA input. Typically the factory emblem is attached to your truck with double sided tape. Use a heat gun, at a low heat setting, and use a piece of floss between the emblem and tailgate to remove the old emblem. On some older models, you may need to drill a small hole in your tailgate to run the wiring through. Most 2006+ models come with the holes already drilled.
Before purchasing check the back of your Monitor/Screen that you have a Yellow RCA input for easy installation.
This emblem is not recommended to be installed with Factory Navigation/Monitor units. It is possible but requires professional installation.
Auto Adjusting Brightness LCD
✓
✓
✓
Auto Dimming Mirror
✓
Compass and Temperature
✓
Remote
✓
Wifi
✓
Dual-Way Recording
✓
Screen Brightness
High Brightness
Ultra High Brightness
Ultra High Brightness
Backup Camera Included
✓
Works Great with Our Backup Cameras
✓
✓
✓
Why buy with Master Tailgaters?
Master Tailgaters is a US-based company that designs and tests all products in the USA to ensure their quality. We carefully inspect every item and offer in-house support for prompt assistance. Choose Master Tailgaters for high-quality products and top-notch support from an American company.
HIGH QUALITY CAMERA: The IP68 waterproof camera has a resolution of 600 TV Lines and .1 Lux light sensitivity. Image sensor: ¼” On-Semi (USA) CMOS Active Pixel Array, Lens: Nidec (Japan) (Glass + Plastic). WIDE ANGLE: 170° wide view HD camera helps you with reversing and parking safely. It is pointed at a slight downward angle so you have full view of your trailer ball hitch. EASY TO INSTALL: Our tailgate handle uses a universal RCA input to connect with your aftermarket monitor or screen — compatible with our rear view mirrors with LCD screens! INCLUDED: Genuine Emblem (part # CL3Z-9942528-B) + Aftermarket Chrome Base + Mounting Screws + Clips WARRANTY: Master Tailgaters tailgate handles are each backed by a 2 year manufacturer warranty.
