Trucker Access › Forums › Diesel News › Brake Violations Put 500-Plus Commercial Motor Vehicles Out of Service – Safety & Compliance
- This topic has 0 replies, 1 voice, and was last updated 5 months, 2 weeks ago by EazyRiDer66.
-
AuthorPosts
-
June 11, 2024 at 8:45 pm #25113EazyRiDer66Keymaster
Commercial vehicle inspectors put 570 commercial motor vehicles out of service for brake-related violations during the Commercial Motor Vehicle Safety Alliance’s annual unannounced Brake Safety Day. That was 11.6% of the 4,898 inspections done by inspectors in 47 jurisdictions throughout Canada, Mexico and the U.S.
Each year, CVSA law enforcement jurisdictions are invited to participate in a one-day unannounced brake-safety inspection and regulatory compliance enforcement event.
On that day, CVSA-certified commercial motor vehicle inspectors conduct their routine roadside inspections with a focus on brake systems and components and provide brake-related inspection and violation data to CVSA.
In 2023, inspectors put 773 CMVs out of service for brake-related issues during Brake Safety Day, or 11.3% of the vehicles checked.
What Was the Most Common Brake-Related Out-of-Service Violation?
The most common cause of brake-related out-of-service violations was 20% brake violations, meaning 20% or more of service brakes on the vehicle(s) had an out-of-service condition resulting in a defective brake.
330 commercial motor vehicles were put out of service for this offense — 57.9% of all brake-related out-of-service violations.
Inspectors found other brake violations on 256 (44.9%) of the commercial motor vehicles inspected, including:
- Worn brake lines/hoses
- Broken brake drums
- Inoperative tractor protection systems
- Inoperative low-air warning device
- Air leaks, hydraulic fluid leaks, etc.
Seventy-three commercial motor vehicles had steering-related brake violations — 12.8% of all brake-related out-of-service violations.
Top Brake Lining/Pad Violations
This year, emphasis was placed on brake lining/pad health and safety. Inspectors found 108 power units and 66 towed units with lining/pad violations.
A total of 114 brake lining/pad violations were discovered on power units. The top brake lining/pad violation on power units was for contamination, with 48 violations.
Seventy-one brake lining/pad violations were identified on towed units. Twenty-three of the violations were for cracks/voids in the linings/pads, which was the top brake lining/pad violation on towed units.
Performance-Based Brake Testers
Nine U.S. jurisdictions with performance-based brake testers (PBBT) used them during Brake Safety Day.
A PBBT is a machine that assesses the braking performance of a vehicle. Federal Motor Carrier Safety Regulations and CVSA’s North American Standard Out-of-Service Criteria require a minimum braking efficiency of 43.5%. If the vehicle’s braking efficiency is below that, it’s not providing the minimum stopping power required and needs to be serviced.
Eighty-eight PBBT inspections were conducted on Brake Safety Day. Four (4.5%) failed to meet the 43.5% minimum braking efficiency required and were placed out of service.
Mark Your Calendar for More Brake-Focused Enforcement Initiatives
CVSA’s unannounced Brake Safety Day is part of Operation Airbrake, a program dedicated to improving commercial motor vehicle brake safety throughout North America. CVSA’s seven-day Brake Safety Week, another Operation Airbrake campaign, is scheduled for Aug. 25-31.
-
AuthorPosts
- You must be logged in to reply to this topic.